|
|
|
Futureguard Patio & Deck Awnings
- 8000 Series How to Measure
|
| |
|
| Projection |
| C= Measurement from top of mounting
space to deck |
5'9" |
6'11" |
8'6" |
10'2" |
11'8" |
13'0" |
Recommened Crack Length |
| E= Measurement from the bottom of the valance
to deck |
|
| 7'6" (90") |
72" |
72" |
72" |
70" |
69" |
53" |
4' |
| 8' |
78" |
78" |
78" |
78" |
78" |
78" |
5' |
| 8'6" |
84" |
84" |
84" |
84" |
84" |
84" |
6' |
| 9' |
90" |
90" |
90" |
90" |
90" |
90" |
6' |
| 9'6" |
96" |
96" |
96" |
96" |
96" |
96" |
7' |
| 10' |
102" |
102" |
102" |
102" |
102" |
102" |
7' |
| over 10' |
|
|
|
|
|
|
8' |
The chart above denotes the approximate clearance witht he pitch set
in the factory set position.
-
Determine width of awning (A). This
requires a clear span with no obstructions. Be sure light fixtures,
down spouts, etc. are not in the way.
-
The awning will require 8" of mounting
space (B). A minimum of 7' 6" is required from the deck
or patio to the bottom of the mounting space.
-
Select the projection that best fits
your needs (D).
Roof Mount
Kit Should be used when:
-
There is insufficient space to mount
the awning (8") or when wall obstructions (ie, downspouts
or light fixtures) are in the way.
-
More height is desired between the bottom
of the awning valance and the deck or patio (E).
To determine the mounting height when a roof mount kit is used:
Measure the distance from your deck or patio to the roof line edge
ot the top of the fascia (F) and add 15". This height will
now become the (C) measurement.
Awning cannot be mounted to the fascia.
See below diagram
|
|
|
|
